![Truguard Anti Climb Security Fencing](/assets/images/logo1.png)
Rotating Anti-climb Security System
![Easy Install](/assets/images/easy_install.png)
Make your premises secure
Easy install, anti-climb guards fitted to walls gates and fences - deterrent and security.
TruGuard parts:
![Truguard rotating anti-climb system (per metre)](/assets/uploads/TruGuard-800x800.png)
Truguard rotating anti-climb system (per metre)
The TruGuard rotating anti-climb system refers to the TruGuard spurs, shaft, connector, support brackets and fixings as these depend entirely on the particular installation.
![Spur for Truguard security fence spikes](/assets/uploads/spur-800x800.png)
Spur for Truguard security fence spikes
TruGuard spurs are manufactured from a high tensile aluminium alloy that will never rust.
![Central Shaft](/assets/uploads/central-saft-800x800.png)
Central Shaft
The TruGuard central shaft is available in 2m lengths extruded from a high tensile aluminium alloy that is also lightweight, being only a third of the weight of mild steel.
![90 Degree Corner Elbow](/assets/uploads/corner-elbow-800x800.png)
90 Degree Corner Elbow
The TruGuard 90° corner elbow offers the ability to create a secure and compact fixing at corners, leaving no area of vulnerability as with other systems.
![Connector](/assets/uploads/connector.png)
Connector
The Connector is TruGuard’s push fit joint engineered for an easy, quick and secure installation, used to join multiple TruGuard shafts in order to form long runs.
![Adjustable Corner](/assets/uploads/adjustable-corner-800x800.png)
Adjustable Corner
The TruGuard adjustable corner offers the ability to create a secure and compact corner for different angles through near 360° or to accommodate any change in elevation around a perimeter.
![Internal Socket](/assets/uploads/internal-socket-523x545-800x800.png)
Internal Socket
The TruGuard internal socket is used to fix the TruGuard Anti Climb System to an abutting wall, pier or post.
![Locking Collar](/assets/uploads/locking-collarpng-800x800.png)
Locking Collar
The TruGuard locking collar holds the central shaft in place preventing it from sliding out of the supports.
![End Cap](/assets/uploads/end-cap-800x800.png)
End Cap
The TruGuard end cap is used to cover any open end of the central shaft preventing dirt, dust and water ingress.
![Cranked Support](/assets/uploads/cranked-support-800x800.png)
Cranked Support
The cranked support is used to secure the TruGuard Rotating Anti Climb System over fences, walls and gates.
![Straight Support](/assets/uploads/straight-support.png)
Straight Support
The straight support is used to secure the TruGuard Rotating Anti Climb System over fences, walls and gates.
![Base Plate Support](/assets/uploads/base-plate-800x800.png)
Base Plate Support
The base plate support is used to secure the TruGuard Rotating Anti Climb System to walls.
![M8 Through Bolts](/assets/uploads/m87-through-bolt-800x800.png)
M8 Through Bolts
M8 through bolts are used to securely fix TruGuard supports to concrete or masonry.